11-02-2020, 07:35 PM
RoboDK is a fantastic product, but a big drawback to my use case is the (almost)impossibility to import robot programs back to it.
For example, I've build a cell, did the simulation, gererated the OLP program, and sent it to robot programmer.
He did some optimizations onsite, but now we need to do a more detailed analysis, and the right direction would be import the current programs back on RoboDK cell and go from there.
I know that is possible import programs from some major brands, but as far I know, this is still unofficial, and depending on the robot setup, the import operation isn't so seamless.
I also know RoboDK has a Generic Post-processor.
So I was wondering if is possible to create some kind of PRE-processor or RoboDK common language, to help import robot programs back onto RoboDK, so users could create their PRE-processos as needed, more or less as happen with post-processors.
For example, I've build a cell, did the simulation, gererated the OLP program, and sent it to robot programmer.
He did some optimizations onsite, but now we need to do a more detailed analysis, and the right direction would be import the current programs back on RoboDK cell and go from there.
I know that is possible import programs from some major brands, but as far I know, this is still unofficial, and depending on the robot setup, the import operation isn't so seamless.
I also know RoboDK has a Generic Post-processor.
So I was wondering if is possible to create some kind of PRE-processor or RoboDK common language, to help import robot programs back onto RoboDK, so users could create their PRE-processos as needed, more or less as happen with post-processors.
