11-26-2020, 10:22 PM
亲爱的Robodk团队,
这是我一直想要发布的请求。正如您所知道的,我正在使用Coverechnique Montreal的LM2实验室使用Fanuc M-20ib / 25的3D打印项目,我们真的很享受与Robodk合作,因为它在研究和实验方面为我们提供了很多自由。
When it comes down to 3D printing, there are a lot of parameters that needs to be considered and one of them is quite critical when using a 6-axis robot : the printhead's rotation around its axis, i.e. the toolframe's rotation around Z.
I have been exploring the machining project parameters and I know that the toolframe offset's rotation around Z can be set to several algorithms. For example: the Minimum tool orientation change, which I currently use for 3D printing. However, I don't find that the other algorithms are useful to 3D printing applications.
我想提出一个变量工具或ientation that could be set at different key time during the program. There could be a selectable algorithm called "custom orientation" which allows the user to run the simulation, pause at the desired TCP location, rotate it around Z using alt+drag on the reference frame and then click on a button to creates a "keyframe" which will trigger an offset of the toolframe for all the next positions coordinates, until a new keyframe is created with a new toolframe offset and so on. The toolframe offset would then be set to different values along the program, according to values set by the user at different location of the toolpath.
I am pretty sure there is a way to come up with this using a Python script. I am just pretty busy right now to attack this :P and I figured it could be a nice addition to your already full-fledge simulation software.
I hope this is interesting :)
jfch.
这是我一直想要发布的请求。正如您所知道的,我正在使用Coverechnique Montreal的LM2实验室使用Fanuc M-20ib / 25的3D打印项目,我们真的很享受与Robodk合作,因为它在研究和实验方面为我们提供了很多自由。
When it comes down to 3D printing, there are a lot of parameters that needs to be considered and one of them is quite critical when using a 6-axis robot : the printhead's rotation around its axis, i.e. the toolframe's rotation around Z.
I have been exploring the machining project parameters and I know that the toolframe offset's rotation around Z can be set to several algorithms. For example: the Minimum tool orientation change, which I currently use for 3D printing. However, I don't find that the other algorithms are useful to 3D printing applications.
我想提出一个变量工具或ientation that could be set at different key time during the program. There could be a selectable algorithm called "custom orientation" which allows the user to run the simulation, pause at the desired TCP location, rotate it around Z using alt+drag on the reference frame and then click on a button to creates a "keyframe" which will trigger an offset of the toolframe for all the next positions coordinates, until a new keyframe is created with a new toolframe offset and so on. The toolframe offset would then be set to different values along the program, according to values set by the user at different location of the toolpath.
I am pretty sure there is a way to come up with this using a Python script. I am just pretty busy right now to attack this :P and I figured it could be a nice addition to your already full-fledge simulation software.
I hope this is interesting :)
jfch.